The Mahoney brand CO2/YAG Laser Power Meter Probe 1000 watts for Laser Engraving Cutting Machines (10.6 to 1.06 microns)
The power meter probe can easily pay for itself with just one or several uses.
Examples include:
(1) Receive in-warranty replacement of bad glass CO2 laser tubes from Chinese laser machine manufacturer.
(2) Note laser tube degradation over time to adjust laser machine power settings to ensure laserable materials are not ruined.
The probe measures laser power for YAG (900-1250 nm) and CO2 (8-11 microns). Works for laser technologies including CO2 lasers, fiber lasers, YAG lamp lasers, diode end pumped lasers, and diode side pumped lasers.
Each probe is fully tested, calibrated, and each probe has an engraved serial number.
Comes with instructions and convenient storage container.
ONE YEAR FULL WARRANTY FOR MANUFACTURER DEFECTS.
CLICK FOR ADDITIONAL PRODUCT INFORMATION AND ORDERING BUTTONS.
Mahoney CO2/Fiber Laser Power Meter 0-1000 watts
Brand Name Mahoney Packaged Weight 4 pounds Product Dimensions 7.9 x 3.5 x 3.5 inches Item Model Number MAH-CYDF-1000CW International shipping cost $22 Compatibility
-
This product is great for owners of CO2 laser cutting machines and laser cutting systems, YAG laser cutting machines, and Fiber laser cutting machines.It even works with RF lasers manufactured by Synrad, Coherent, and Rofin. Also slow flow CO2 lasers including El En. And, fast flow CO2 lasers under 100 watts including smaller or older PRC lasers and Mitsubishi lasers and Mazak lasers. Also works well with industrial fiber laser sources manufactured by IPG and SPI lasers.Also works with industrial fiber laser cutting machines powered by fiber lasers under 1000 watts. And, works with YAG welders that are used for YAG laser cutting, including the popula 300, 500, 600, and 800 watt models.Get your quick laser power output reading today and exercise your warranty as needed.Ensure the best quality for the laser cutting now.
Mahoney CO2 Laser Power Probe Customer Reviews
5.0 out of 5 stars. A good CO2 power meter. By A Y Van Heugten on July 14, 2014. Very reliable. Less complex than a digital device, but does the job well. You have to wait a few minutes between readings, but that's a small price to pay for the the considerably lower cost of this item compared to digital meters.
5.0 out of 5 stars. Does exactly what is supposed to. By danielvwnwieringen on July 7, 2014. Does exactly what is supposed to. A great way to accurately line up the mirrors. Shipped and Received quickly.
4.0 out of 5 stars. Differential temperature testing. By PatrickK on October 20, 2015. Worked when used as directed, slightly tricky getting back to ambient temperature if using more than once using the "Cold water" technique as took a while to settle at new temperature. Adjustment quite stiff but overall gave good results.
5.0 out of 5 stars. Must buy for novice user. By P. Minke on July 30, 2014. Simple, accurate and a must have for setting up and understanding the operation of CO2 laser. Especially if you bought a cheap Chinese model.
5.0 out of 5 stars. Works great! Easy to use. By James Graham on April 15, 2015. Works great! Easy to use! Bought this to check out my 10 year old Epilog Helix 45, still running at 42 after 10 yrs.
5.0 out of 5 stars. Five Stars. By Richard G. on September 24, 2015. Great product as advertised.
5.0 out of 5 stars. Five Stars. By Daniel ROBERT on November 24, 2015. Very good for the prise.
5.0 out of 5 stars. Five Stars. By Randy Berry on September 24, 2014. Excellent tool.
-
The Mahoney laser power meter probe is utilized to locate bad optics. Maximum CO2 Laser output power is measured before and after each mirror. In this video, the final mirror is measured and found to be bad. The mirror absorbs roughly 9 percent of the laser energy. In general, mirrors are expected to absorb less than 3%.
Click for Video: How my Mahoney 200 watt CO2 Laser Power Probe saved me thousands and stopped a fake seller. The video provides a sample demonstration of the Mahoney laser power probe, and describes how it saved me from a fake seller of CO2 laser tubes.
Click for Instructable: How to measure CO2 laser power on a Laser Engraving Machine and Laser Cutting Machine using a simplified (low cost) CO2 laser power meter. Includes an online instruction set, or a downloadable pdf for Instructable members.
Click for Video. Johnny presents common examples utilized Mahoney power probe.
Includes an online instruction set, or a downloadable pdf for Instructable members.
The market leaders implement measured laser power for material settings. Must know laser power to implement material settings effectively:
(1) Universal Laser Systems referenced materials: Click for document: Materials Settings for ULS M360 and V460. Shows table with laser output power as first setting.
(2) Epilog Laser. Click for document Epilog Laser Fusion Materials Settings. Table contains columns showing laser output power.
(3) Trotec Laser. Click for Rowmark settings for measured 60 watt output Trotec Laser.
(4) Laserbits for all major brands. Click for webpage to Laserbits Laser Settings promoted for Laser University. Requires knowledge of laser output power.
Major competitiors:
(1) Click for pricing Synrad Power Wizard 250 sold by Laserbits
(2) Click for pricing Macken Instruments 100 watt probe sold by Cascade Laser
(3) Click to see Gentech Pronto 250 sold by General Microtechnology and Photonics